TMF In - Line Centrifugal Fans


General Description

This feature, the compact dimensions and the standardized inlet and outlet sizes grant a particular ease of installation.

The low noise level and the good pressure head make them ideal for industrial and residential installations, in extracting hoods and small exhausting plants, since they can be installed in any point along the duct or at the duct ends, either in intake or exhaust.

They are suitable to convey clean air with a temperature range from -10°C to +60°C.

Airflow range – 70 to 1,200 CMH



  • General exhaust application.
  • Kitchen exhaust (without hood).
  • Bathroom/toilet.
  • Workshops.
  • Roof ventilation with DRF series.


  • Casing in steel sheet, protected against atmospheric agents by epoxy paint.
  • Single-phase, ball-bearing electric motor with non-self-resetting thermal cut-out, particularly suitable for speed regulation.
  • Backward curved centrifugal impeller with high efficiency and low noise level.
  • Statically and dynamically balanced according to ISO 1940.
  • Downstream guide vanes, for improved efficiency.
  • External electric connections enclosed in a terminal box in self-extinguishing technopolymer, with IP44 protection.
  • Fans are supplied with fixing brackets and manufactured in galvanized steel sheet, protected against atmospheric agents by epoxy paint and completed with screws and wall plugs.

Accessories (Upon Request)

  • Speed regulators.
  • Back-draught shutters.
  • Collars for fixing to the duct.
  • Revit models for BIM.

  • Intertek
  • applus
  • ul
  • amca
+91 7767800015/16